Brian Dixon
- Location: Dover
- Registered: 23 Sep 2008
- Posts: 23,940
howard mcsweeney1- Location: Dover
- Registered: 12 Mar 2008
- Posts: 62,352
Shouldn't be a problem this time, being done in the early hours and hardly touching the town.
Guest 1395- Registered: 5 Nov 2014
- Posts: 463
Might shift a few cones in Snargate Street!
Lew Finnis
Button
- Location: Dover
- Registered: 22 Jul 2016
- Posts: 3,065
A mobile one-bedroomed house vs the Alkham Valley Road. Really?
(Not my real name.)
Guest 1395- Registered: 5 Nov 2014
- Posts: 463
That's only the bit off the A20 onto the A260 - the thing is too big for the Roundhill Tunnels, hence the route via Churchill Avenue. Still needs some interesting manoevering.
Lew Finnis
Andy B
- Location: dover
- Registered: 10 Nov 2012
- Posts: 1,820
i,d be surprised if it fits under railway bridge.
Guest 1395- Registered: 5 Nov 2014
- Posts: 463
No railway bridges on its route
Lew Finnis
Button
- Location: Dover
- Registered: 22 Jul 2016
- Posts: 3,065
Ah, does it go up past Aycliffe or Maxton?
(Not my real name.)
Brian Dixon
- Location: Dover
- Registered: 23 Sep 2008
- Posts: 23,940
no
Andy B
- Location: dover
- Registered: 10 Nov 2012
- Posts: 1,820
Surely has to pass either one to get to Alkham valley off A20 before Roundhill tunnel.Obviously not travelling entire Alkham valley from Kearsney .
Jan Higgins
- Location: Dover
- Registered: 5 Jul 2010
- Posts: 13,895
Last time those in the Folkestone Road area had a disturbed nights sleep as it crawled past.
-----------------------------------------------------------------------
I try to be neutral and polite but it is hard and getting even more difficult at times.
-------------------------------------------------------------------
Karlos- Location: Dover
- Registered: 1 Oct 2012
- Posts: 2,560
As per link in post 1, A20 to Alkham Valley turning, down Canterbury Road into Folkestone, then Churchill Avenue and back onto M20...
[U]
It will join the A20 at the Union Street junction. It will then leave the A20 and travel along the Alkham Valley Road, the A260 Canterbury Road, the A259 Churchill Avenue and join the M20 at junction 13.
It will leave the motorway at junction 9 and then rejoin it to travel back to junction 10, due to a weight restriction at this junction.
The load will leave the M20 at junction 10, travelling along the A20 and Church Lane before reaching Sellindge. [/U]
Button
- Location: Dover
- Registered: 22 Jul 2016
- Posts: 3,065
Nice u-turn at Union St/Snargate St then; tyre-scrub could be interesting!
(Not my real name.)